Material: Aluminium EN AB and AC 46100 – Al Si Cu 2 (Fe)
Standard Finish: Rough – Grey (the finished part is tapped)
Possible coatings: Black electrophoresis, Anodising
Available in the following sizes: 32 – 40 – 50 – 63 – 80 – 100 – 125 – 160 – 200 – 250 – 320
This type of rear male hinge with bushings is made in order to comply with the ISO 15552 reference standard. All parts are manufactured and assembled at our headquarters in Italy and are subjected to strict quality controls in our laboratories under the supervision of our technical staff.
Technical Specifications: the male hinge can be sold in two different variants
- US04 Without Bushings
- US30 With Bushings | Bushings: PTFE sintered steel
Field of use: the MP4 rear male hinge with bushings is used for ISO 15552 pneumatic cylinder/actuator assembly. It is intended to be mounted on the rear end of the cylinder. The MP4 rear male hinge with bushings is fixed to the cylinder with 4 screws and works in combination with our MP2 rear female hinge with bushings (see our article 0050). The steel pin (article 0007, fixed with 2 seegers) connects the MP2 and MP4 parts, making standard application perfect.
Advantages: the use of aluminium makes the application lighter. Resistance is guaranteed according to ISO 15552 standards, with the possibility of requesting the results of our strength tests carried out by our specialised technicians.
Customisation: the MP4 rear male hinge with bushings can be customised to suit your needs in terms of geometry (dimensions and tolerances), finish (protective treatments), components (bushings), packaging.