Material: Aluminium EN AB and AC 46100 – Al Si Cu 2 (Fe)
Standard Finish: Rough – Grey (the finished part is tapped)
Possible coatings: Black electrophoresis, Anodising
Available in the following sizes: 12-16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100
This type of flange is made in order to comply with the ISO 21287 reference standard for COMPACT cylinders. All parts are manufactured and assembled at our headquarters in Italy and are subjected to strict quality controls in our laboratories under the supervision of our technical staff.
Technical Specifications: the flange for ISO 21287 compact cylinders is sold with code
- US70 With spot facing
Field of use: the flange for compact cylinders is used for ISO 21287 COMPACT cylinder/actuator assembly. It is intended to be mounted on both the front and rear of the cylinder. It must remain in contact with the rear and front hinges.
The flange for ISO 21287 compact cylinders is fixed to the head and tail of the cylinder with 4 screws and 4 through holes for your cylinder rods.
Advantages: the use of aluminium makes the application lighter. Resistance is guaranteed according to ISO 21287 standards, with the possibility of requesting the results of our strength tests carried out by our specialised technicians.
Customisation: the flange for compact cylinders can be customised to suit your needs in terms of geometry (dimensions and tolerances), finish (protective treatments), components (screws), packaging.