Material: Aluminium EN AB and AC 46100 – Al Si Cu 2 (Fe)
Standard Finish: Rough – Grey (the finished part is tapped)
Possible coatings: Black electrophoresis, Anodising
Available in the following sizes: 32 – 40 – 50 – 63 – 80 – 100
This type of female hinge without bushings is made in order to comply with the ISO 21287 reference standard for COMPACT cylinders. All parts are manufactured and assembled at our headquarters in Italy and are subjected to strict quality controls in our laboratories under the supervision of our technical staff.
Technical Specifications: the female hinge without bushings can be sold in two different variants
- US61 Without Bushings
- US77 With Bushings | Bushings: PTFE sintered steel
Field of use: the female hinge without bushings for COMPACT cylinders is used for ISO 21287 COMPACT cylinder/actuator assembly. It is intended to be mounted on the rear end of the cylinder. The female hinge without bushings for COMPACT cylinders is fixed to the cylinder with 4 screws. The steel pin (article 0007, fixed with 2 seeger) connects the fixing to the cylinder, making standard application perfect.
Advantages: the use of aluminium makes the application lighter. Resistance is guaranteed according to ISO 21287 standards, with the possibility of requesting the results of our strength tests carried out by our specialised technicians.
Customisation: the female hinge without bushings can be customised to suit your needs in terms of geometry (dimensions and tolerances), finish (protective treatments), components, packaging.